Preparing For Installation Of New Flooring.

Warmth & Space, Please
Installers will work in areas other than the room(s) being laid with new Floors To Go flooring in order to prepare and store the new floor covering during installation. Typically, this will be a garage, patio or carport. Please be sure there is electricity available and that the temperature is at least 65 degrees in the rooms to be installed.

Door Cutting
Our installers will remove hinged doors and replace them after your new Floors To Go flooring is installed. If, however, your new flooring is thicker than your old flooring, the doors may need trimming for proper clearance. In this instance the doors will be left off their hinges so they can be trimmed.

Moldings
Baseboard moldings, in most installations, can be left in place. Our installers will work with the molding, but cannot be responsible for breakage and scratches.

Color Changes & Shading
Many of today's high luster fabrics display a light or dark shade difference in color depending on the direction the carpet is laid in the room.

Pattern Matching
Due to the nature of the manufacturing process, most print and multi-tone patterns are impossible to match exactly. Many of these styles will require additional yardage to achieve the closest match possible.

Sanding
If your installation requires sanding, it is a good idea to cover all cupboards and furniture in the adjacent rooms. If sanding is to be done, you may want to seal off the room with plastic.

Material Waste
Every installation has material waste; these leftover pieces are most commonly used in closets, or when stairs and halls are recovered.

Carpet Seams
In order to properly install your new Floors To Go flooring, cutting and seaming are quite common. Today's heat-bonded seams are as strong as the rest of the carpet; however, the seams themselves are not invisible. Our installers take great pride in making the seams as inconspicuous as possible

Painting
Take a look at the room for which your Floors To Go flooring was bought. What is the condition of your ceiling? Do your walls need repainting? We recommend that all painting is completed before your new Floors To Go flooring arrives.

Empty Rooms, Please!
Rooms and closets that will be resurfaced must be emptied. Please remember, for both your protection and ours, if the rooms are not cleared before delivery, our company will not be liable for any damage that might occur, directly or indirectly, while handling your property.

Dining Rooms & Dens
Remove all your breakables (plates, vases, lamps, and collectibles) prior to moving the actual furniture; make sure all electrical components are disconnected before you attempt to move your stereo, computer, VCR or TV. Our installers are not responsible for reconnecting these items.

Kitchen & Utility Areas
Disconnect your washer, dryer, and all gas appliances. Our installers are not responsible for disconnecting or reconnecting any appliances.

Bedrooms
Beds need to be stripped prior to installation. Installers will dismantle the beds if necessary.

Bathrooms
If vinyl is installed, please arrange for the toilet bowl to be removed prior to the installers' arrival.